gnasher729
Aug 17, 03:44 AM
1. The video cards are underclocked compared to their PC equivalents on the Mac.
Could you give some evidence for that, except that they are underclocked on the MacBook Pro _when they are idle_?
Could you give some evidence for that, except that they are underclocked on the MacBook Pro _when they are idle_?
mmmcheese
Sep 13, 01:02 PM
Anyone seen this?
http://images.dailytech.com/nimage/1775_large_longtermroadmap.png
The real architecture changes are coming June then June then June 2012. With derivatives in the years between.
So Merom(Merom Santa Rosa)/Conroe/Woodcrest(Clovertown) are the end of the road of separate chips. No more mobile/desktop/sever chip... all are the same (should expect mobiles to have the lowest MHz, then desktop, then toping out with server)
And what's interesting is that each architecture change will be a leap in performance similar to Pentium D to Conroe transition. (source) (http://www.dailytech.com/article.aspx?newsid=2649)
Screw Tigerton, Penryn's next (probably June 2007)
Screw that, I'm not going to buy until Gesher!
http://images.dailytech.com/nimage/1775_large_longtermroadmap.png
The real architecture changes are coming June then June then June 2012. With derivatives in the years between.
So Merom(Merom Santa Rosa)/Conroe/Woodcrest(Clovertown) are the end of the road of separate chips. No more mobile/desktop/sever chip... all are the same (should expect mobiles to have the lowest MHz, then desktop, then toping out with server)
And what's interesting is that each architecture change will be a leap in performance similar to Pentium D to Conroe transition. (source) (http://www.dailytech.com/article.aspx?newsid=2649)
Screw Tigerton, Penryn's next (probably June 2007)
Screw that, I'm not going to buy until Gesher!
basesloaded190
Apr 6, 11:12 AM
I still don't think this means new MacBook Airs in June. Can anyone really see Apple releasing new hardware before Lion is released?
Why not?
Why not?
doctor-don
Apr 27, 10:45 AM
I thought looking at my location histories was interesting. I, too, have no delusions that I cannot be tracked (cell phone, credit card purchases, etc.) I wonder if all the paranoids realize that any GPS camera encodes that information in the image. Share that photo online and anyone can get the metadata with location of photograph.
You wanna be connected, you can't be truly anonymous.
You wanna be anonymous, sell you computer, smart phone, cut up credit cards, and move to an undocumented shack in the middle of nowhere with no utilities.
Images taken with my camera do not contain GPS data if I have turned off that feature.
You wanna be connected, you can't be truly anonymous.
You wanna be anonymous, sell you computer, smart phone, cut up credit cards, and move to an undocumented shack in the middle of nowhere with no utilities.
Images taken with my camera do not contain GPS data if I have turned off that feature.
bedifferent
Apr 5, 07:50 PM
Interestingly this contradicts the information my friend on the design team hinted towards. I know the release is imminent so time will tell.
HecubusPro
Sep 19, 09:20 AM
It's not going to happen today. No worries. We have Photokina ahead of us.
nep61
Apr 5, 04:49 PM
And I was sooooo close to buying AVID MC 5.5... thank goodness for an extended wait for my Tax refund... Now I'll sit tight to see if this RUMOR is actually true..... :apple:
cait-sith
Aug 11, 12:44 PM
Doesn't Europe have many many carriers in each country? There's no carrier that spans the entire EU, is there?
Who wants to pay 400$ for a phone that will look like an antique 12 months from now? That's a lot of money to pay for the status of having a brand new phone.
Who wants to pay 400$ for a phone that will look like an antique 12 months from now? That's a lot of money to pay for the status of having a brand new phone.
zoran
Oct 14, 02:50 PM
well its said that clovertown will be here early is that early/late november or early/late december, any new rumors regarding this subject?
Jamieserg
Apr 5, 05:16 PM
I'm not trolling, this is an honest question. But isn't a Final Cut pretty much worthless for commercial use without a way to put the results on Blu-Ray?
real madrid wallpapers 2011
real madrid wallpapers 2011 hd. real madrid wallpapers 2011 hd. arsenal
real madrid wallpapers 2011 hd
real madrid wallpaper hd. real
real madrid wallpapers 2011 hd. real madrid vs barcelona
real madrid wallpapers 2011 hd
real madrid wallpapers 2011
fc barcelona wallpaper 2011 hd
real madrid wallpapers 2011. real madrid wallpapers 2011
rayz
Aug 8, 02:31 AM
Time Machine: the attempts to say this was done before with VMS, System Restore or Shadow Copy are pathetic, and those who made the comparison should be ashamed of themselves. Of course it isn't a completely new idea: it's been something that people have wanted to do for years. As far as I can see, Apple is the company that first demonstrated a practical version of this feature that an ordinary person could use. I predict that Microsoft's implementation will be a complicated mess that regular users find opaque and will not use (just like System Restore is).
Er ... you right click on the file, select properties, and then just click on the previous versions tab.
MS has actually put it where most people expect to find it; I thought they might put it on the actual right-click menu, but I honestly don't think that it's going to get used enough for folk to want to have it in their face all the time.
Oh, and MS doesn't need a separate drive for it to work. If the Apple Time Machine ( :rolleyes: ) really does need a separate drive, then it sounds as if Apple has probably just skinned a version control system it pulled from the open source world.
Er ... you right click on the file, select properties, and then just click on the previous versions tab.
MS has actually put it where most people expect to find it; I thought they might put it on the actual right-click menu, but I honestly don't think that it's going to get used enough for folk to want to have it in their face all the time.
Oh, and MS doesn't need a separate drive for it to work. If the Apple Time Machine ( :rolleyes: ) really does need a separate drive, then it sounds as if Apple has probably just skinned a version control system it pulled from the open source world.
fullmanfullninj
Apr 8, 02:33 AM
I think what they're saying is it costs Best Buy (and I guess other resellers) $90 for each AppleTV unit they order in - and they sell it for Apple's set price of $99, meaning they make a measly $9 profit from the sale of one unit. They didn't mean that they are selling the unit to the consumer themselves for $90.
Edit. Original poster replied saying the exact same thing
Hm, I see what you're saying. I will have to double check for iPad sales. As far as I know, however, they do not contribute toward meeting daily budgets.
Edit. Original poster replied saying the exact same thing
Hm, I see what you're saying. I will have to double check for iPad sales. As far as I know, however, they do not contribute toward meeting daily budgets.
~Shard~
Jul 14, 02:37 PM
To charge $1800 for a system that only has 512MB is a real disappoitment. 1GB RAM oughta be standard, especially with Leopard being on the horizon.
Agreed. I can make an argument for the consumer machines, where perhaps 512 MB is sufficient for basic users. Specifically, why force them to pay more for 1 GB if they don't need it. But when it comes to the Pro machines, as if anyone buying one of these beasts is not going to require at least 2 GB of RAM, let alone 1 GB. No one buys a quad Xeon Powermac to just surf the Internet and check their e-mail. :cool:
Agreed. I can make an argument for the consumer machines, where perhaps 512 MB is sufficient for basic users. Specifically, why force them to pay more for 1 GB if they don't need it. But when it comes to the Pro machines, as if anyone buying one of these beasts is not going to require at least 2 GB of RAM, let alone 1 GB. No one buys a quad Xeon Powermac to just surf the Internet and check their e-mail. :cool:
ugp
Jun 22, 09:26 PM
Ugh! Lucky!! I think I'm going to just keep calling my local radioshacks and head to one at least an hour before they open on Thursday!
Well being Best Friends has it's advantages. And his DM is actually pretty cool. The store that received 5 of them that he is getting the 2 from, they are all idiots in that store. The Manager is literally Cross-Eyed, Employees don't even greet you when you walk in and are not very knowledgable. It's a shame too because I use to work at that store for several years. Received many trophies for sales. Including this one...
http://i48.tinypic.com/24fjhvm.jpg
What's really sad is that it's a Mall store. Use to be a Million Dollar plus store. Now it has dropped well below that. Although it was back in the day when they actually cared about their employees. They have such a high turn over rate anymore. I had quit because I got tired of the DM (Different DM then) threatening us with our jobs everyday during Golden Quarter. I left my keys on the desk and never returned along with a few others Managers at the time.
Well being Best Friends has it's advantages. And his DM is actually pretty cool. The store that received 5 of them that he is getting the 2 from, they are all idiots in that store. The Manager is literally Cross-Eyed, Employees don't even greet you when you walk in and are not very knowledgable. It's a shame too because I use to work at that store for several years. Received many trophies for sales. Including this one...
http://i48.tinypic.com/24fjhvm.jpg
What's really sad is that it's a Mall store. Use to be a Million Dollar plus store. Now it has dropped well below that. Although it was back in the day when they actually cared about their employees. They have such a high turn over rate anymore. I had quit because I got tired of the DM (Different DM then) threatening us with our jobs everyday during Golden Quarter. I left my keys on the desk and never returned along with a few others Managers at the time.
leekohler
Apr 27, 12:58 PM
As for the stimulus packages, Ford just reported a profit, and that company refused the stimulus money. If a company is going to fail let it do that. Let it take responsibility for its own blunders. Don't let a codependent government rescue it.
That's not "liberalism". Bush did the same thing for the banks. And when did Obama leave a baby in a room alone to die? Dude, what are you smoking today? ;)
That's not "liberalism". Bush did the same thing for the banks. And when did Obama leave a baby in a room alone to die? Dude, what are you smoking today? ;)
shamino
Jul 14, 05:35 PM
Ok, here's ANOTHER can of worms. Since we're on EFI now and can boot in Windows. It means our video cards, etc. don't have Open Firmware BIOS. Does that mean ANY "Windows" video card will work as long as OS X has drivers for it? Does OS X even have generic VGA drivers?
Interesting question, but I don't think any of us here will have the answers.
PCs don't use EFI. I don't know if a generic AGP/PCIe card can be initialized by EFI, or if the card will need some EFI code to be on-board.
As for OS X, I think we can be fairly certain that Apple will only bundle drivers for cards that Apple sells. If you install a third-party card, they will probably tell you that you'll need a driver from the card's manufacturer - that's what they've historically told customers.
Generic VGA drivers? I'm sure they were developed - they'd be very useful during that time when OS X/Intel was internal-only. But I wouldn't expect them to be bundled with a shipping copy of the system software.
Now, assuming that the Mac firmware (including whatever EFI drivers they include in it) is capable of initializing a generic video card, then there should be no need for more than a device driver, which the card vendors can probably provide, if they are so inclined. If the cards will require special ROM code for EFI, however, then we're back to the same problem that plagued the PPC systems.
Interesting question, but I don't think any of us here will have the answers.
PCs don't use EFI. I don't know if a generic AGP/PCIe card can be initialized by EFI, or if the card will need some EFI code to be on-board.
As for OS X, I think we can be fairly certain that Apple will only bundle drivers for cards that Apple sells. If you install a third-party card, they will probably tell you that you'll need a driver from the card's manufacturer - that's what they've historically told customers.
Generic VGA drivers? I'm sure they were developed - they'd be very useful during that time when OS X/Intel was internal-only. But I wouldn't expect them to be bundled with a shipping copy of the system software.
Now, assuming that the Mac firmware (including whatever EFI drivers they include in it) is capable of initializing a generic video card, then there should be no need for more than a device driver, which the card vendors can probably provide, if they are so inclined. If the cards will require special ROM code for EFI, however, then we're back to the same problem that plagued the PPC systems.
Full of Win
Mar 31, 09:34 PM
What is this, "let's go on an Apple fansite and act surpised that it's full of Apple fans" day?
No, it's "make up a fake day" day.
No, it's "make up a fake day" day.
shadowfax
Jul 27, 04:13 PM
Well it's back to the future for all of us. Remember when the Mac was going 64-bit with the introduction of the G5 PowerMac on June 23, 2003? :rolleyes: Only more thanthree years later and we're doing it all over again thanks to Yonah's 7 month retrograde.
This may be a bit of a disappointment, but I think that Merom is still in the "past:" merom is not a 64-bit chip. None of these Core 2's are. They just have EM64T (http://en.wikipedia.org/wiki/EM64T), which allows them to address more than 4 GB of memory directly. These are not true 64-bit processors like the G5--that is, the Core 2 Duo won't work with 64-bit applications. The G5's Intel counterpart would, I think, bit the Itanium chip, based on intel's IA-64 (http://en.wikipedia.org/wiki/IA-64) Architecture, which is truly 64 bit in every way. Merom simply contains a 64-bit extension to the IA-32 (x86) (http://en.wikipedia.org/wiki/X86_architecture#64-bit) architecture, which I understand is still a 32-bit architecture. We're not out of the woods yet...
This may be a bit of a disappointment, but I think that Merom is still in the "past:" merom is not a 64-bit chip. None of these Core 2's are. They just have EM64T (http://en.wikipedia.org/wiki/EM64T), which allows them to address more than 4 GB of memory directly. These are not true 64-bit processors like the G5--that is, the Core 2 Duo won't work with 64-bit applications. The G5's Intel counterpart would, I think, bit the Itanium chip, based on intel's IA-64 (http://en.wikipedia.org/wiki/IA-64) Architecture, which is truly 64 bit in every way. Merom simply contains a 64-bit extension to the IA-32 (x86) (http://en.wikipedia.org/wiki/X86_architecture#64-bit) architecture, which I understand is still a 32-bit architecture. We're not out of the woods yet...
Multimedia
Aug 21, 05:43 AM
I stopped by the Apple store tonight to play with a Macpro. I'm getting ready to buy and thought I'd get some hands on experience to see how it performed with Finalcut Pro. I was especially interested in how it handles playback of uncompressed footage.
The store had a 2.6 hooked up to a 30"ACD. Everything on the machine was stock. I launched FCP and it appeared with a project already loaded (about 5 seconds). The project was a simple 20-30 second 720x480 NTSC clip of hockey game footage. I selected the clip and copied it to a new layer and threw a blend mode on it AND changed the speed to 85%. Next I copied and made another layer and changed the speed and offset it and changed the transparency to 80%. 3 layers total with the top two manipulated. I hit the render and it finished in about 30 seconds. :)
I know, not very scientific, but I just wanted to get a feel for how fast the Macpro would render manipulated footage. Anyhow, next I changed the output in project settings to "uncompressed" and hit render again. Again, it took less than a minute to render and the CPU usage in console was maxing out at only 42% per core.
Once the render completed, I hit the play button to see how the stock Macpro would handle playback of the uncompressed footage. It played for about 4 seconds then threw an error saying that frames were being dropped during playback. Not good. I was hoping that the Macpro would be able to play uncompressed footage from the timeline without 3rd party acceleration or setting up a raid. The error message suggested turning off RT effects (of which I did, but still had dropped frames) or get a faster drive. There was a couple other things the error suggested, but I can't remember at the moment. I wonder if having the ATI card would have made a difference? Not sure if FCP uses the GPU for playback, but I would think that should make a difference. Ram would probably help too. Anyone know what might be going on? Am I expecting too much out of this machine?
Sorry for sort of getting off topic. I thought this might be an appropriate area to post this; I wasn't feeling up to starting a new thread.That's great info. Would you please tell us:
1. How fast that is compared to what Mac model-speed you are currently using?
2. IE Were you impressed or not so impressed with how fast-slow it rendered?
3. What kind of speed were you expecting?
I'm no expert, but my guess is that the lack of RAM may have been the culprit. Need more independent tests like this from other FCP users. Thanks a lot. :)
The store had a 2.6 hooked up to a 30"ACD. Everything on the machine was stock. I launched FCP and it appeared with a project already loaded (about 5 seconds). The project was a simple 20-30 second 720x480 NTSC clip of hockey game footage. I selected the clip and copied it to a new layer and threw a blend mode on it AND changed the speed to 85%. Next I copied and made another layer and changed the speed and offset it and changed the transparency to 80%. 3 layers total with the top two manipulated. I hit the render and it finished in about 30 seconds. :)
I know, not very scientific, but I just wanted to get a feel for how fast the Macpro would render manipulated footage. Anyhow, next I changed the output in project settings to "uncompressed" and hit render again. Again, it took less than a minute to render and the CPU usage in console was maxing out at only 42% per core.
Once the render completed, I hit the play button to see how the stock Macpro would handle playback of the uncompressed footage. It played for about 4 seconds then threw an error saying that frames were being dropped during playback. Not good. I was hoping that the Macpro would be able to play uncompressed footage from the timeline without 3rd party acceleration or setting up a raid. The error message suggested turning off RT effects (of which I did, but still had dropped frames) or get a faster drive. There was a couple other things the error suggested, but I can't remember at the moment. I wonder if having the ATI card would have made a difference? Not sure if FCP uses the GPU for playback, but I would think that should make a difference. Ram would probably help too. Anyone know what might be going on? Am I expecting too much out of this machine?
Sorry for sort of getting off topic. I thought this might be an appropriate area to post this; I wasn't feeling up to starting a new thread.That's great info. Would you please tell us:
1. How fast that is compared to what Mac model-speed you are currently using?
2. IE Were you impressed or not so impressed with how fast-slow it rendered?
3. What kind of speed were you expecting?
I'm no expert, but my guess is that the lack of RAM may have been the culprit. Need more independent tests like this from other FCP users. Thanks a lot. :)
slabbius
Sep 13, 10:44 PM
you know what? since my dinosaur of a desktop (3yr old :rolleyes: 3Ghz P4 HT that can't even run a retail 3DSMax without me getting fatal exception blue screen of death errors on winxpsp2) the time value of money says that a new Mac Pro Quad Core machine is still worth more now than a Mac Pro Octo Core machine in the future. Reason is I need a much more viable means of work NOW, not later. I can always upgrade, and besides, the new chips will probably be rather pricey, therefore causing a rise in the current mac pro price? I'm no analyst so don't flame me if i'm wrong. ;)
Besides I'm a young full sail student that just got an educational loan to purchase a computer and a camera.... and maybe an ipod :) Don't try to give me the "if you wait" lecture, either.
Besides I'm a young full sail student that just got an educational loan to purchase a computer and a camera.... and maybe an ipod :) Don't try to give me the "if you wait" lecture, either.
mwswami
Jul 23, 05:22 PM
At those prices, sign me up for a Quad 2.3!!!! I'll buy that along with a newly designed 23" ACD for $699. :D
A Quad 2.3 for $1999 ... not going to happen.
Even the cheapest configuration of Dell Precision 490 Workstartion (http://catalog.us.dell.com/CS1/cs1page2.aspx?br=6&c=us&cs=04&fm=11456&kc=6W463&l=en&s=bsd) with dual 2.3 Woodcrests comes out to $2348. This includes 1GB RAM, 80GB SATA drive, and 128MB nVidia Quadro NVS 285 2D graphics.
Apple prices are typically a few hundred $ higher. I am guessing it will be more like $2699 with a larger hard drive and better graphics.
A Quad 2.3 for $1999 ... not going to happen.
Even the cheapest configuration of Dell Precision 490 Workstartion (http://catalog.us.dell.com/CS1/cs1page2.aspx?br=6&c=us&cs=04&fm=11456&kc=6W463&l=en&s=bsd) with dual 2.3 Woodcrests comes out to $2348. This includes 1GB RAM, 80GB SATA drive, and 128MB nVidia Quadro NVS 285 2D graphics.
Apple prices are typically a few hundred $ higher. I am guessing it will be more like $2699 with a larger hard drive and better graphics.
neko girl
Mar 5, 03:18 AM
From what I understand:
NY Guitarist
Apr 5, 07:36 PM
Also, I'm waiting for the RED Scarlet camera to hit the market, and have heard speculation that RED and Apple will release a new highly efficient compression codec based on RED's Redcode called REDRay.
The speculation is that REDRay will be used for everything from 4K DCP playback in movie theaters to a download/streaming version that will be usable for buying up to 4K movies through iTunes.
RED hired plugin developer Graeme Nattress awhile ago and he has been pushing the REDcode science forward with excellent results.
The speculation is that REDRay will be used for everything from 4K DCP playback in movie theaters to a download/streaming version that will be usable for buying up to 4K movies through iTunes.
RED hired plugin developer Graeme Nattress awhile ago and he has been pushing the REDcode science forward with excellent results.
NathanMuir
Feb 28, 06:36 PM
Well, I have nothing to say, but that the University has grounds for dismissal if difference of opinion arises.
True, you can argue the gay card, but in this case, they college played the rights cards to get rid of him. Was it the best choice? No.
Still, it's the college's right on who teaches or not; and seeing how it's a Catholic Church college, I'd say it was bound to happen.
I agree, the situation in the OP was bound to happen sooner or later.
True, you can argue the gay card, but in this case, they college played the rights cards to get rid of him. Was it the best choice? No.
Still, it's the college's right on who teaches or not; and seeing how it's a Catholic Church college, I'd say it was bound to happen.
I agree, the situation in the OP was bound to happen sooner or later.
Niciun comentariu:
Trimiteți un comentariu